Click image to view full size image
●This machine have 4 stepping motor ,which control x axis and y axis and have High Performance heated wire, which is alloy wire, composed by Ni,Cr,Co,Mo and Ti.
●CNC cutting machine can cut different shapes through computerized x axis and y axis running horizontally or vertically same time, then heated wire can cut EPS foam after heated.
●There are two ways to input picture of products, draw by professional linear cutting software or input the picture by scanning drawing board.
Item |
Unit |
LWQ-2000D |
LWQ-3000D |
|
| Initial block | length |
mm |
≦2000 |
≦3000 |
width |
mm |
≦2000 |
≦3000 |
|
height |
mm |
≦1260 |
≦1260 |
|
Cut size |
horizontal |
mm |
≦2000 |
≦3000 |
vertical |
mm |
≦1000 |
≦1000 |
|
sideway |
mm |
≦1200 |
≦1200 |
|
| Cut speed | m/min |
0~0.5 |
0.5-1 |
|
| Wire diameter | mm |
0.35 – 0.6 |
0.2 – 0.8 |
|
| power | V/Hz |
AC380/50 |
AC380/50 |
|
| Connected load | heating |
Kw |
7.3 |
7.3 |
cutting |
Kw |
3.7 |
3.7 |
|
| Overall dimension | mm |
4000*2400*2200 |
3200*3200* 2500 |
|
| Weight | Kg |
1000 |
1500 |
|
Application of CNC EPS Cutting Machine
LONGWELL, with over 20 years experience, is one of the largest cnc cutting machine manufacturers and suppliers in China. With the help of advanced equipment and technology, all of our products are of high quality and low price. Welcome to buy the cheap customized machine from our factory.